[Xastir] Xastir and another APRS program

[mlhpub]

Thanks Max and Ray for answers.Alright, all is running fine with :-common axport F4ACU-3 with Baycom- aprx F4ACU-3- Xastir F4ACU-15 (now in RX only)73 de F4ACUMatthieu 
-------- Message d'origine --------De : vk2tv <vk2tv at exemail.com.au> Date : 18/09/2019  23:57  (GMT+01:00) À : xastir at lists.xastir.org Objet : Re: [Xastir] Xastir and another APRS program I must have missed this one.1. Give aprx a callsign-SSID - e.g. F4ACU-3 *2. Give Xastir a different callsign-SSID - e.g. F4ACU (implies F4ACU-0)  *   *  They need to be different to steer incoming traffic to the right program.3. Give axports a callsign-SSID (e.g. F4ACU-4) OR an alias, with or with out a SSID - e.g. I used to use KEMPC-1, KEMPC-2, etc (my town was Kempsey) in axports.  Kernel AX25 only uses the axport's configured callsign with tools like "call" (axcall) and beacons, and TCP/IP if that is configured in kissattach. Using an alias-SSID may not be legal in some countries.I used multiple programs sharing ax25 ports for years with my big packet BBS/Node system and it works well. I used alias-SSID in axports because I'd run out of callsign-SSID combinations.Ray vk2tvOn 18/9/19 10:53 pm, Max Harper wrote:>   I'm pretty sure you can set it up like you want. I went to start up xastir on my pi3 and for some strange reason it won't run so I can't look at my settings for you. To keep the clutter on the map down, I only used xastir to display what my station hears, it never beaconed, aprx did that.> Max KG4PID>      On Tuesday, September 17, 2019, 03:32:50 PM CDT, MLHPUB <mlhpub at free.fr> wrote:>   >   Hi all,>> Maybe a "stupid" question ?>> On a Linux computer, I now run Aprx full-digipeater F4ACU-3 (defined> like this with "mycall") with one AX25 port defined as F4ACU-3 in> /etc/ax25/axports and I want to add a graphical view with, of course,> Xastir.> I know it is possible to use multiple programs with the same AX25 port,> what I want to do.>> In this case, how should I configure Xastir for "mycall" parameter ?> -> if I use F4ACU-3, this callsign will be both for Aprx and Xastir. Not> really good.> -> is it possible to use F4ACU-0 with AX25 port defined as "F4ACU-3" ?>> Thanks for your help !>> 73 de F4ACU>> Matthieu> _______________________________________________> Xastir mailing list> Xastir at lists.xastir.org> http://xastir.org/mailman/listinfo/xastir>    > _______________________________________________> Xastir mailing list> Xastir at lists.xastir.org> http://xastir.org/mailman/listinfo/xastir>_______________________________________________Xastir mailing listXastir at lists.xastir.orghttp://xastir.org/mailman/listinfo/xastir