[Xastir] Trying to reinstall Xastir

[Randy Whitney]

----- Original Message ----- 
From: "Tom Russo" <russo at bogoflux.losalamos.nm.us>
>
> I built it twice this weekend, using a cygwin install that had just
updated
> to Xorg on Saturday.  No problems at all on my machine, I opened cygwin
> setup, clicked next a bunch of times, it removed XFree86 and installed
Xorg,
> and then xastir built perfectly.
>
> What options are you giving configure?  What are the relevant error
messages
> from config.log when it fails to detect the headers?
>
> -- 
> Tom Russo    KM5VY     SAR502  DM64ux         http://www.swcp.com/~russo/
> Tijeras, NM  QRPL#1592 K2#398  SOC#236 AHTB#1 http://www.qsl.net/~km5vy/
> (1) Ignorance of your profession is best concealed by solemnity and
silence,
> which pass for profound knowledge upon the generality of mankind.
>                 -------"Advice to Officers of the British Army", 1783

Tom,
Thanks for responding.

I opened cygwin setup, followed the list in README.win32 which did include
Xorg.

I have posted my config.log so that you may look at all the errors that are
generated during the configure process. It is available at
http://kk6rw.com/config.log .

There are other errors generated during the configure process but the
X-Windows error is "configure: error: *** No X11!  Install X-Windows
development headers/libraries! ***"

I'm going to go back over the cygwin setup to make sure I have all the
required files again to make sure.

Thanks for taking a look at this problem.

Randy - KK6RW