[Xastir] Xastir behind Corporate Network

[Gerry Creager N5JXS]

Xastir ports are the same as all other aprs stuff.  No biggie.

Get them to allow outbound 10152 and 14580 (full feed, user-defined 
filter, respectively) and 2323 (weather) if you need that.

You can have the network folks call me if there are security questions. 
  Numbers below.

gerry

Tom Robson, ve7did wrote:
> Running xastir at an EOC which is connected up to a VPN tunnel.  The network 
> connection works fine for browsing the net, but xastir will not connect to 
> the aprs servers.  The xastir network configuration settings are ok as they 
> are identical to setups which I run at home all the time.
> 
> I have no idea what the folks have done to set up the network configuration 
> for the VPN tunnel.  All I know so far is there is a jack on the wall which 
> will browse the network.
> 
> Does xastir use the same port(s) to connect up to the aprs servers or is it 
> something different?  I thought I should try and get some answers here before 
> going to the network folks in our EOC.
> 
> ...73 Tom
> 
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> https://lists.xastir.org/mailman/listinfo/xastir

-- 
Gerry Creager -- gerry.creager at tamu.edu
Texas Mesonet -- AATLT, Texas A&M University	
Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.847.8578
Page: 979.228.0173
Office: 903A Eller Bldg, TAMU, College Station, TX 77843