[Xastir] Xastir with KPC 3+ TNC no xmit

[Tom Russo]

On Sat, Dec 01, 2007 at 07:01:43PM +0000, we recorded a bogon-computron collision of the <bernard.tyers at gmail.com> flavor, containing:
> I did a hard reset of the KPC3+, and I have confirmed it is in KISS mode.

AH!

The tnc-startup.kpc3 script is for a serial TNC in normal mode, not KISS mode.
If you've set up the interface with "Serial TNC" and connected the serial port
to a KISS TNC it'll do the Wrong Thing.

To use your KPC3 in KISS mode you need to set it up as a "Serial KISS TNC" 
interface in xastir instead of a serial TNC.  If you do that, it won't even 
give you the option of using a start-up script. 

-- 
Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
Tijeras, NM  QRPL#1592 K2#398  SOC#236 AHTB#1 http://kevan.org/brain.cgi?DDTNM
"And, isn't sanity really just a one-trick pony anyway? I mean all you get is
 one trick, rational thinking, but when you're good and crazy, oooh, oooh,
 oooh, the sky is the limit!"  --- The Tick