[Xastir] KISS setup help

[John Ronan]

Hi folks,

TNC7 is configured via s selector switch at the front. AFTER  
configuring what the switch positions mean in software beforehand, I  
don't remember the default setttings, but mine speaks KISS now unless  
being configured.

Also, I'd never really seen a good explanation of the KPC3+ problems  
before. The power cycle issue explains something I'd been struggling  
with trying to make a digi with a WRT54G and KPC3+

Is it all firmware versions of the KPC3+ (Including the latest) and  
is the 9612+ afflicted with the same problems?

Thanks
de John
EI7IG


On 25 Aug 2009, at 23:15, Curt, WE7U wrote:

> On Tue, 25 Aug 2009, David Sprangers wrote:
>
>> I thought Xastir settings put the TNC into KISS mode,
>
> Only for a particular european TNC, I think an TNC7?  The Xastir
> togglebutton doesn't work for any other TNC.  You must set the TNC
> into KISS mode using whatever commands the TNC requires.  Some of
> the early TNC's had a whole list of commands that were necessary,
> but most later ones just did it with "KISS ON" I think.
>
> -- 
> Curt, WE7U.                         <http://www.eskimo.com/~archer>
>    APRS:  Where it's at!                    <http://www.xastir.org>
>   Lotto:  A tax on people who are bad at math. - unknown
> Windows:  Microsoft's tax on computer illiterates. - WE7U.
> The world DOES revolve around me:  I picked the coordinate system!"
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir