[Xastir] OSX Options?

[Alex Carver]

Then you can still compile remserial on the Mac or switch to socat to do what you need.  There's no AX.25 involved anywhere on your link, only on the host.  You've already converted over to a virtual serial link using net2kiss plus remserial on the host so just keep what you have.


--- On Thu, 3/26/09, Stephen - K1LNX <k1lnx at k1lnx.net> wrote:

> From: Stephen - K1LNX <k1lnx at k1lnx.net>
> Subject: Re: [Xastir] OSX Options?
> To: "Xastir - APRS client software discussion" <xastir at lists.xastir.org>
> Date: Thursday, March 26, 2009, 3:09 PM
> It basically looks like this:
> 
> Box 1 (host)
> AX.25 stack running to a TNC-X KISS TNC, I'm using
> net2kiss and remserial:
> 
> net2kiss - net2kiss -a -i ax0 -s /tmp/net2kisslink &
> remserial - remserial -d -p 23000 -s "9600 raw"
> /tmp/net2kisslink &
> 
> Box 2 (client)
> I use remserial to connect to the remote serial port:
> 
> remserial - remserial -d -r 192.168.1.201 -p 23000 -l
> /dev/remserial1
> /dev/ptmx &
> Xastir - Serial KISS TNC connected to /dev/remserial1
> 
> I got confused earlier, I thought I was running AX.25 on
> the client
> machine, but I'm not, Xastir is basically just
> connecting to what it
> thinks is a KISS TNC (but getting piped over the link
> instead)
> 
> 
> 
> On Thu, Mar 26, 2009 at 3:03 PM, Alex Carver
> <kf4lvz at yahoo.com> wrote:
> >
> > In the current configuration that you have, how is
> remserial attached to the TNC via the AX.25 stack?
> >
> >
> > --- On Thu, 3/26/09, Stephen - K1LNX
> <k1lnx at k1lnx.net> wrote:
> >
> >> From: Stephen - K1LNX <k1lnx at k1lnx.net>
> >> Subject: Re: [Xastir] OSX Options?
> >> To: "Xastir - APRS client software
> discussion" <xastir at lists.xastir.org>
> >> Date: Thursday, March 26, 2009, 3:01 PM
> >> > Sorry, but I'm not terribly familiar with
> any of
> >> them.  I'm just
> >> > beginning to figure them out as part of a rig
> I'm
> >> putting together.
> >>
> >> Hey np, thanks for the input :) I may just end up
> running
> >> it in a VM
> >> for now until I can figure all of this out.
> >>
> >> 73
> >> Stephen
> >> K1LNX
> >>
> >> On Thu, Mar 26, 2009 at 2:49 PM, Jason KG4WSV
> >> <kg4wsv at gmail.com> wrote:
> >> > On Thu, Mar 26, 2009 at 1:27 PM, Stephen -
> K1LNX
> >> <k1lnx at k1lnx.net> wrote:
> >> >> Radio/TNC running on an AX.25 stack on a
> separate
> >> box. I then use
> >> >> remserial to connect the two boxes
> together.
> >> >
> >> > You may be able to compile remserial for the
> Mac, or
> >> use socat, etc
> >> > and let socat on the mac talk to remserial on
> the
> >> linux box.
> >> >
> >> > Sorry, but I'm not terribly familiar with
> any of
> >> them.  I'm just
> >> > beginning to figure them out as part of a rig
> I'm
> >> putting together.
> >> >
> >> > -Jason
> >> > kg4wsv
> >> >
> _______________________________________________
> >> > Xastir mailing list
> >> > Xastir at lists.xastir.org
> >> >
> >>
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
> >> >
> >>
> >>
> >>
> >> --
> >> Stephen Brown - ARS K1LNX
> >> Johnson City, TN EM86
> >> http://www.k1lnx.net
> >> _______________________________________________
> >> Xastir mailing list
> >> Xastir at lists.xastir.org
> >>
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
> >
> >
> >
> > _______________________________________________
> > Xastir mailing list
> > Xastir at lists.xastir.org
> >
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
> >
> 
> 
> 
> -- 
> Stephen Brown - ARS K1LNX
> Johnson City, TN EM86
> http://www.k1lnx.net
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir