[Xastir] ax25 question

[Steve Rogers]

Thanks Lee for the wiki on ax25, I was finally able to start the ax25tnc on Xastir, know working on aprsx on the synaptic on Ubuntu 10.4.  73 kd5mkv

> Date: Sat, 23 Jul 2011 08:41:27 -0400
> From: lee.bengston at gmail.com
> To: xastir at lists.xastir.org
> Subject: Re: [Xastir] ax25 question
> 
> > On Tue, Jul 12, 2011 at 12:13 PM, Steve Rogers <kd5mkv at hotmail.com> wrote:
> >
> > Is it possible you could update the wiki for Debian/Ubuntu users as how you setup
> > ax25tnc, as the wiki may be out of date. For example the modprobe.conf run
> > /sbin/update-modules, I have given a year or so ago. As for the serial adapter,
> > if it is a prolific serial adapter, they seem to work for awhile then stop sending
> > incoming and outgoing packet from the tnc to xastir. Thx Steve kd5mkv
> 
> http://www.xastir.org/wiki/HowTo:AX.25_-_Ubuntu/Debian
> 
> Fyi, I added an AX.25 startup script example to the HowTo above for
> Debian/Ubuntu.  I'm currently using aprx as an IGate, which autostarts
> on boot.  The startup script for the AX.25 port runs before the aprx
> daemon starts.
> 
> A working AX.25 interface opens up plenty of possibilities.  I now
> have ldsped installed which provides an AGWPE interface to the AX25
> port.  So now Xastir can run on a separate (faster) computer and
> connect to the headless Acer nettop and share the TNC with the local
> aprx IGate.  In fact, I can run either Xastir or aprsis32 from
> different computers on the home network and share the TNC with the
> aprx igate.
> 
> If there is any interest in a HowTo for the wiki on using Xastir with
> ldsped, I might try to add something, but I'm not making any promises.
> 
> Regards,
> Lee - K5DAT
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir