[Xastir] ax25 question
Lee Bengston
lee.bengston at gmail.com
Wed Jul 27 21:37:47 EDT 2011
On Wed, Jul 27, 2011 at 7:58 PM, Steve Rogers <kd5mkv at hotmail.com> wrote:
>
> The executable resides in the file /usr/local/bin/xastir but have not able to get ax25tnc to work on ubuntu 10.4, which means I will give it a shot another machine.
> I running Ubuntu i386 version on a Hp AMD 64 with xastir-2.0.1 from CVS. thanks Kd5mkv
I was never able to get one of my two usb to serial adapters to work
as an ax25 interface. I tried starting all over with the one that
didn't work previously, and still no dice. I found as long as it was
plugged into the TNC, the kissattach command wouldn't work - I forget
the exact error message. If I unplugged it from the TNC, I could get
the initial commands to work without errors, but then as soon as I
plugged it in and tried to test, I would get errors. Perhaps you are
encountering something similar with the TNC-X.
I was able to get AX.25 to work with Xastir in Ubuntu 11.04, but on
that box I was using a 'real' serial port (ttyS0). That computer
'quad boots' LMDE, Ubuntu 11.04, Mepis 11.0, and Aptosid (latest
version). I was able to get AX.25 to work on the first 3 - never
tried it on Aptosid.
Regards,
Lee - K5DAT
More information about the Xastir
mailing list