[Xastir] ax25 question

[Steve Rogers]

I have been reading over the aprx manual, now know that I have a functioning port. Steve kd5mkv

> Date: Thu, 28 Jul 2011 23:17:14 -0400
> From: lee.bengston at gmail.com
> To: xastir at lists.xastir.org
> Subject: Re: [Xastir] ax25 question
> 
> On Thu, Jul 28, 2011 at 6:44 PM, Curt, WE7U <curt.we7u at gmail.com> wrote:
> 
> > You'll need an aprsd version that has been tweaked to be able to use the
> > AX.25 port instead of directly taking over the COM port itself.  I seem to
> > remember there were one or two flavors of it out there which could do that,
> > but you may have to compile it from sources to do it.  The compiled packages
> > in various Linux repositories are probably done from the SourceForge stable
> > release of aprsd, and I'm not sure it has it.
> >
> A little digging around shows that it may be as simple as this:
> 
>    "Set your tncport to the name of the port from /etc/ax25/axports"
> 
> I'm thinking it was set to /dev/ttyS0 instead.  I'm not an aprsd user,
> though, so I can't confirm.  I have been able to get Xastir to share a
> TNC with either aprsg or aprx, but I haven't tried aprsd.
> 
> Lee - K5DAT
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir