[Xastir] igating issues

[Curt, WE7U]

On Sun, 20 Mar 2011, Dale Seaburg wrote:

> I have my xastir (latest cvs version) running.  I have a internet server 
> setup for texas.aprs2.net port 14580.  I have a filter (r/31.43/-99.08/150). 
> I see traffic, but I don't seem to be gating any local traffic back to the 
> APRS-IS.  I do not have the Transmit checked for now.  I assume that means 
> gating IS traffice back onto RF, correct?

There are specific radioboxes on each RF interface for:

*) Disable all IGate traffic
*) Allow RF to Inet traffic ONLY
*) Allow RF->Inet and Inet->RF traffic

So you can enable/disable for each interface that way.

Then there's a global selection which takes precedence over the individual interface toggles.  It's at Configure->Defaults.

Make sure you've also put in your callsign and your callpass.  Sounds like you did already if you have a range filter and you're receiving packets from the 'net.

-- 
Curt, WE7U.        http://www.eskimo.com/~archer
APRS Client Capabilities:  http://www.eskimo.com/~archer/aprs_capabilities.html