[Xastir] CVS and running get-fcc-rac.pl

[Udo Visintini]

Hi,
 
I can't get to update my xastir 2.0.3 from CVS to correct the script-files.
I tried all the commands given hier on the xastir-mailing list.
No luck. I got the shape files running (get-NWSdata), but nothing else.
Thanks

Udo Wolfram Franko VISINTINI   KF4KUL 


Lealman Special Fire District CERT Member 570-07
Community Emergency Response Team-Basic Training Course-317
SKYWARN Advanced Certified through the National Weather Service in Ruskin PIN-296A
CPR and AED Certified by the American Safety & Health Institute 
ARRL Member # 6508504
SPAR Member (Society for the Preservation of Amateur Radio)

FEMA Independent Study Courses

IS-07 A Citizen’s Guide to Disaster Assistance 
IS-100 Introduction to the Incident Command System 
IS-242 Effective Communications 
IS-700 National Incident Management System (NIMS)
IS-802 ESF #2 Communications Emergency Support Function　


This message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. I, Udo Visintini shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. I, Udo Visintini don't guarantee that the integrity of this communication has been maintained or that this communication is free of viruses, interceptions or interference. 




 

> From: xastir-request at lists.xastir.org
> Subject: Xastir Digest, Vol 85, Issue 2
> To: xastir at lists.xastir.org
> Date: Mon, 3 Dec 2012 12:00:02 -0500
> 
> Send Xastir mailing list submissions to
> xastir at lists.xastir.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
> or, via email, send a message with subject or body 'help' to
> xastir-request at lists.xastir.org
> 
> You can reach the person managing the list at
> xastir-owner at lists.xastir.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Xastir digest..."
> 
> 
> Today's Topics:
> 
> 1. Re: Remote headless server options for use with Xastir?
> (Lee Bengston)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 3 Dec 2012 07:57:29 -0500
> From: Lee Bengston <lee.bengston at gmail.com>
> To: Xastir - APRS client software discussion <xastir at lists.xastir.org>
> Subject: Re: [Xastir] Remote headless server options for use with
> Xastir?
> Message-ID:
> <CAPF_JSLo76bm9nZYkN9iz=wgv89yLERCSdqbgnqYm25PT5ZUDg at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> On Mon, Nov 19, 2012 at 9:58 PM, Lee Bengston <lee.bengston at gmail.com> wrote:
> > I just recently set up a Raspberry Pi running DIXPRS with an AX25
> > interface to a TNC. I haven't tried adding ldsped yet, but that's the
> > next step. As Tom said, ldsped will have to be built from source on
> > the Rasperry Pi or Beaglebone. All I have is the binary of ldsped
> > that the author sent me about 15 months ago, so I need to request the
> > source code.
> 
> As it turned out, there was an arm binary for ldsped vailable at the
> author's site, so I downloaded and installed it on the Raspberry Pi,
> and it worked fine. Now pretty much any APRS client on the home
> network that supports AGWPE interfaces can access the TNC that is
> connected to the Rasperry Pi. DIXPRS is running on the Raspberry Pi
> 7x24 as a headless IGate while the other apps are used on demand.
> 
> Regards,
> 
> Lee - K5DAT
> 
> 
> ------------------------------
> 
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
> 
> 
> End of Xastir Digest, Vol 85, Issue 2
> *************************************