[Xastir] Configuration list for D700

[Liz]

On Mon, 18 Mar 2013 15:38:23 -0500
Chris-N9JCA <n9jca at wowway.com> wrote:

> Going back to my original post
> I seem to have "fixed" the NO decode problem
> GPS USED was enabled, after turning it OFF/NOT USED
> I am now RX/TXing fine
> I now want to set up my D700 as a Digipeater on 144.990,
> as we have a marathon slated for April 6th and want to use a different
> frequency, other than 144.390. I filled out the UIDIGI as
> WIDE1-1,WIDE2-1 and the DIGIPEATER as ON Should I ADD UIDIGI=ON
> DIGIPEATER=ON to the Configuration file in Xastir for startup.d700
> On another note,if someone can take a look at my configuration file I 
> posted earlier and tell me if I need to make any changes, it would be 
> greatly appreciated

Xastir doesn't digipeat.
If you need a digipeater and you need to see where people are on the
map, I suggest setting up a ax25 interface, and using aprx to digipeat,
and setting xastir to look at the ax25 interface instead.
you have to decide which (if any) gets to send to aprs-is.


I'm sure there will be more suggestions.

Liz VK2XSE