[Xastir] Raspberry PI B ...

[Curt Mills]

Note: Ken lives much closer down your way now.

Wish I could help, but I won't be making brunch again until mid-June and
definitely won't be in your area.

On Wed, Apr 20, 2016 at 10:31 AM, David Flood <davidf4 at mindspring.com>
wrote:

> I was running a box stock configuration but just for fun I dropped the GPU
> memory down to minimum, overlocked to 900 MHz, unplugged the external USB
> drive that isn't used by Raspian (I dual boot on a 64G card between Raspian
> and Gentoo, trying to get rid of SystemD), and rebooted.
>
> Within 15 minutes of launching it was back at 100% and stuck there...
>
> Ken, I know that you have some test files.  I can probably find time to
> play with them if you'll send them.  As an alternative I could loan you the
> PI at next week's Brunch (I know this week is FEST)...
>
>
> -----Original Message-----
> >From: Dexter N Muir <dexy at xtra.co.nz>
> >Sent: Apr 19, 2016 1:55 PM
>
> >Back to basics: have you checked ground-level configuration? Menu >
> >Preferences  > Raspberry Pi Configuration, Performance tab: Overclock. I
> >have mine set at High (950 MHz), and I suspect most units will be stable
> >at that. This allows xastir to fully render the screen and drop back to
> >around 20% CPU usage in a reasonable time.
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir
>



-- 
Curt, WE7U
http://wetnet.net/~we7u
http://www.sarguydigital.com