[Xastir] Xastir 1.9.9 help

[Michael Lewis]

Curt, WE7U wrote:
> On Wed, 15 Sep 2010, Michael Lewis wrote:
>
>> Ok Curt I'm home now and here is the settings for the bank
>>
>> BANK is 0
>> P300 is FALSE
>> TXTDISP is FALSE
>
> I'm not familiar with the particular characteristics of the TT4, but
> for all other TNC's that I know of you can't get such a listing if
> you're in KISS mode.  Once you go to KISS mode then you're stuck
> there until you take it out, and all or nearly all of the settings
> you list make no difference to the KISS mode operation.  The only
> settings that matter after that are things like slottime,
> p-persistence, and TXD.
>
> Basically what I'm saying is:  If you can get such a listing then
> you aren't in KISS mode.  If you took it out of KISS mode just to
> get such a list, they don't matter in KISS mode anyway so forget
> about them.  Let Xastir set up the few KISS settings that are
> needed.
>
> Make sense?
>
The settings I listed come from the config of the TT4 by using hyper 
terminal if you type commands you can see all your settings for the 
bank. Xastir is already setup for serial KISS mode port setting is 19200