[Xastir] I finally got it!

[John Wilson]

On Thu, 2010-09-16 at 12:38 -0700, Curt, WE7U wrote:

> On Thu, 16 Sep 2010, Michael Lewis wrote:
> 
> > Without the splitter in and I'm a bit embarrassed.. got minicom working on 
> > linux and I happen to be looking at the TT4 hardware manual and the firmware 
> > manual and I noticed the ABAUD was set to 4800 and in xastir it was set to 
> > 19200.. I was thinking to myself no way... I changed the setting and sure 
> > enough TT4 can transmit now in Xastir.
> 
> Don't be embarrassed at all.  Most of the time the most difficult
> H/W and S/W problems turn out to be something really simple.  After
> a while you get used to it.
> 
> Some of the most complex software bugs end up being patched with 1
> to 10 lines of code.  Sometimes one character change.
> 
> Some severe hardware problems are caused by being one pin off on a
> connector, or wiring the connector backwards.  *it happens.
> 
> Good deal on getting it working!
> 

Did you use the Alpha config program to line that up or the older way
where you had to type in hyperterminal: ABAUD 4800?

What specific lines did you have to set from default to get it to work
with Xastir?

73 John